Keys Fitness ST-IB - Manual (Page 9)

9
Assembly
Step 6
Tighten the "T"-handle (45) into the seat carriage (42). Pull the "T"-handle (45) out as far as
it will go and slide the seat carriage (42) onto the frame (8).
Attach the front leg (12) to the frame (8) using two M8X60mm bolts (59), two M8X65mm bolts
(46), six M8 washers (50), and four M8 nylon locknuts (49).
Step 7
Set the pins on the adjustment tube (9) into a set of brackets located on the left and right
uprights (3 & 4).
Pin
3
4
9
Pin
Figure 7
42
8
49
12
45
59
46
49
50
50
50
50
Figure 6
NOTE : Hand tighten bolts and nylon nuts until machine is fully assembled.