Items supplied, Correct usage, Appliance description – Kompernass KH 1098 User Manual

Page 5: Preparation, Before the first use, Setting the time

Advertising
background image

- 3 -

Items supplied

• Coffee Maker
• Glass jug
• Measuring spoon
• Operating Instructions
Before taking the appliance into use check to ensure
that all of the items listed have been supplied and
that there are no visible signs of damage.

Note:

On delivery, the measuring spoon is to be
found in either the water tank or the glass jug.

Correct Usage

The coffee maker is intended exclusively for brewing
coffee. This coffee maker is intended exclusively for
use in private households. Do not use it commercial-
ly. This appliance in intended only for indoor use.

Appliance description

q

Filter

w

Lid

e

Water tank

r

Keep-warm plate

t

Display

y

red indicator lamp

u

green indicator lamp AUTO SET

i

Button MIN

o

Button HOUR

a

Button PROG

s

Button ON/AUTO/OFF

d

Coffee button

f

Driptray grill

g

Coffee passage

h

Outer lock

j

Coffee passage lock

k

Outer lock

l

Glass jug

1(

Filter basket

Preparation

• Remove all packaging material from the appliance

and the accessories.

• Clean the appliance and all accessories (see

chapter "Cleaning").

• Place the coffee maker on a level and slip-free

surface.

• Open the lid

w

.

• Install the filter basket

1(

so that the lever settles

into the recess on the coffee maker.

• Place the filter

q

in the filter basket

1(

.

• Lay the driptray grill

f

in the driptray on the

coffee maker.

• Insert the power plug into a power socket.

Before the First Use

Note:

When filling the appliance with water, never
exceed the MAX marking in the water tank

e

.

The appliance could overflow!

• To remove possible production residues, before

the first use brew up 10 cups of plain water,
without coffee, and allow it to flow through the
appliance.

Setting the Time

• Press the button PROG

a

once, so that CLOCK

appears in the display

t

.

• Repeatedly press the button HOUR

o

for hours,

resp. the button MIN

i

for minutes, until the correct

time is programmed in. If you hold the buttons
down, the numbers run through faster.

• Press the button PROG

a

twice. The time

display is now programmed,

or
• if you do not press any other button for ca. 10

seconds, the indicator CLOCK extinguishes in
the display

t

and the time is programmed.

IB_KH1098_E26058_LB6.qxd 21.01.2009 13:31 Uhr Seite 3

Advertising