Kenwood KDV-C820 EN - Manual (Page 11)

Selecting the folder you want to hear.
1 Stopping play and Folder Select mode
Press the [
38] or [7] button.
2 Selecting the desired folder
Press the [DISC–] or [DISC+] button.
3 Decide the folder to play
Press the [
38] button.
The Folder Select mode releases, and the MP3 in the folder
being displayed is played.
Folder Select Mode (MP3)
Press the [ 4] or [¢] button.
Disc Search
DVD Searching for a chapter
VCD[PBC ON] Searching for a select
VCD[PBC OFF], CD-DA Searching for a track
MP3 Searching for a file
Track/Chapter Search
Selecting the disc you want to hear.
Press the [DISC–] or [DISC+] button.
Disc Search
Press the [ 7] button.
Press the button once during playback stops it and the position
where it is stopped is stored in memory.
• Press [ 38] under this condition to resume the play.
• No operation is possible depending on disks.
• For MP3, Refer to <Folder Select Mode>. (page 11)
Press the [ 7] button.
Press the button twice to cancel playback.
Stopping playback (DVD, VCD, CD-DA)
Press the [ 38] button to make the disc pause.
Press the [ 38] button again to start play again.
• The following operation may not be available with certain discs.
• For MP3, Refer to <Folder Select Mode>. (page 11)
Pausing and Restarting Disc Play (DVD, VCD, CD-DA)
• Before selecting a source of this unit on the center unit
– Turn on/off the power on the remote controller.
• After selecting a source of this unit on the center unit
– Select the source mode of this unit to turn it on.
– Select the other modes to turn off this unit.
– Cannot turn off this unit on the remote controller.
Operation after the end of a disc is reached
Playback does not automatically switch to the next disc once the
current disc is played to the end. Switch the disc manually.
Disc Operation
DVD, VCD[PBC ON] The operation differs according to the type
of disc. (Generally the menu reappears.)
Playback starts from the beginning of the
disc.
VCD[PBC OFF],
CD-DA, MP3
— 11 —
KDV-C810_U.S_r02 02.12.16 12:51 PM Page 11