Kenwood KDV-C820 EN - Manual (Page 37)

— 37 —
? The subtitle is not displayed.
✔ The DVD disc being played does not contain the recording of
subtitles.
☞ The subtitle cannot be displayed when the DVD disc being played
does not contain the recording of subtitles.
? The voice (or subtitle) language cannot be changed.
✔ The DVD disc being played does not contain the recording of more
than one audio (or subtitle) language.
☞ The voice (or subtitle) language cannot be changed when the DVD
disc being played does not contain the recording of more than one
voice (or subtitle) language.
? The viewing angle cannot be changed.
✔ The DVD disc being played does not contain the recording of more
than one angle.
☞ The viewing angle cannot be changed when the DVD disc being
played does not contain the recording of more than one angle.
✔ You are attempting to switch the angle in a DVD section where more
than one angle is not recorded.
☞ More than one viewing angle may be recorded only in limited
sections in a disc.
? Playback will not start even after a title is selected.
✔ A viewing restriction (RATING) has been set for the disc.
☞ Check the viewing restriction level (RATING) setting.
? The voice or subtitle language selected in the initial setting is not
played.
✔ The DVD disc being played does not contain the recording of the
selected voice or subtitle language.
☞ Use a DVD disc containing the recording of the selected voice or
subtitle language.
MP3 source
? Cannot play an MP3. 67
✔ Not conforming to ISO 9660 Level 1/2, and Joliet.
☞ Use a medium conforming to ISO 9660 Level 1/2, and Joliet.
✔ The MP3 has no or invalid track name extension. 68
☞ Add the ".MP3" extension to the MP3 track name.
✔ The media is scratched or dirty. 69
☞ Clean the media, referring to the section on <Disc cleaning>
(page 6).
? Noise or no sound generated when an MP3 is played. 70
✔ The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
? Takes time before the unit starts playing MP3. 71
✔ The medium contains many albums, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
? Fails to play MP3 in the intended order. 72
✔ The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
? The sound skips when an MP3 is being played. 73-1
✔ The media is scratched or dirty.
☞ Clean the media, referring to the section on <Disc cleaning>
(page 6).
✔ The recording condition is bad. 73-2
☞ Record the media again or use another media.
? Can’t enter Folder Select mode. 76
✔ There’s no folder recorded in the MP3 media.
☞ Use a media with levels.
? The songs in the selected folder aren’t played in Folder Select
mode.
77
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
? The MP3 track/disc search takes time. 78
✔ Many tracks are recorded on the media.
☞ When the media directory is complex, the track/disc search can
take time.
KDV-C810_U.S_r02 02.12.16 12:53 PM Page 37