Konica Minolta CM-SA - Manual (Page 2)

2
1. Installing the software
The CM-SA software is provided on a CD-ROM. A CD-ROM drive is required to install the software. When installing
the software, you must log on to the computer as a user with Administrator privileges.
1.1 Installation procedure
Install the CM-SA software.
If your OS is Windows Vista or Windows 7, a dialog which checks User Account Control is displayed
during the process. When this dialog box is displayed, click Continue.
1. Start Windows on your computer.
2. Insert the CM-SA CD-ROM into the CD-ROM drive.
3. The install program will start automatically. If it does not start automatically, double-click the setup.exe icon.
4. The Select Language dialog box opens, but only English can be selected. Click OK.
5. Click Next.
6. Read the software license agreement carefully. Select I accept the terms in the license agreement and click Next.
7. The set-up program asks you to choose the folder in which you want to install the software. To install the
software to a location other than the indicated folder, click the Change button, select or type the path to the
location, and then click OK.
8. Click Next.
9. Click Install.
The set-up program will begin copying the files.
10. When the installation finishes, click Complete.
1.2 Creating a shortcut
When the CM-SA has been installed, a shortcut to the CM-SA is registered on the desktop. The shortcut to
the CM-SA is also added to the Windows Start menu which can be accessed by selecting “KONICA
MINOLTA” - “Skin Analysis Software CM-SA”. To place a shortcut in another location, create it with
Windows Explorer or another program.
1.3 To uninstall
1. Click the Start button. Select Settings - Control Panel and double-click the Add/Remove Programs icon.
2. Select Skin Analysis Software CM-SA from the list of Change or Remove Programs and click the Change/
Remove button.
3. A dialog box that enables you to change, correct or delete programs opens. Select Delete and click Next.
4. When the file deletion confirmation dialog box opens, click OK. The uninstall program will start.
5. When the uninstall process is completed, click Complete.
2. Connection
By connecting the instrument to the PC, you can control the measurement process and other operations from the
CM-SA. You can use either a USB cable or a Bluetooth
® adapter for the connection with the CM-700d/600d, and
can use an RS-232C cable with the CM-2600d/2500d.
When a USB cable or Bluetooth ® adapter is used to connect the instrument with a PC, you need
to install their respective device drivers when connecting for the first time.