Kompernass Balance KH 5006 - Manual (Page 10)

6. When you step off from the scale the running display
“bALAnCE“and “0.0kg” again appears on the display. The
scale is now ready for the next measurement. If you remain
on the scale, the scale switches off automatically after 60
seconds.
ᕩ
Displays
„0-Ld“ The weight on the scale exceeds 160kg / 352lb
The batteries for the remote control are almost empty
and need replacing.
The batteries of the scale are almost empty and need
replacing.
„Err“ The scale is unable to measure body fat and water contents.
Should this error message appear, proceed as follows:
- check the stored entries for completeness and correctness.
- step on the metal contacts; do not wear shoes or
stockings. Your feet must be clean and dry when you
step on the scale. Feet that are too dry can however
affect the measurement. In this case moisten your feet
with a moist cloth and repeat the measurement.
- stand as still as possible on the scale and do not interrupt
the measuring process.
„----„ The remote control is not properly connected to the scale or
the scale is off. Put the remote control within the range of the
transmitter or switch on the scale.
µ
Care instructions
• Clean the scale only with a neutral cleaning agent and a moist cloth.
• Remove the batteries if the scale is not in use for an extended period of time.
Store the scale in a dry and clean place.
• Do not attempt to disassemble or repair the scale.
• Treat the scale carefully. Do not drop it and do not jump onto it.
10
RZ_IB_Köfett_LB4 22.09.2003 11:22 Uhr Seite 10