Kompernass Balance KH 5006 - Manual (Page 6)

Water content in the body
Newborn babies 80 %
Baby 3 months 70 %
Adult 25 years 60 %
Adult 85 years 50 %
ᕥ
Remote control
This scale is controlled with an infrared remote control which also includes the display of the scale.
You can simply pull the remote control from the scale and operate it manually.
- Always hold the remote control over the device so that the transmission lens of the remote control
is above the sensor lens of the device. This is generally the case if you stand in front of/on the
scale and hold the remote control in your hands.
- You can also mount the remote control on the wall above the scale, the transmission lens is horizontal.
ᕦ
Entering personal data
Before you can determine your body fat and water contents you will have to store your personal data
(sex, age and size). A total of 10 storage places are available. To enter your personal data proceed as
follows:
1. Switch on remote control: Remove the remote control
from the scale. Press the key
U
to switch on the remote
control. The running display “bALAnCE“ will appear on the
display above the line and the display “---- kg” below the
line.
2. Select storage place: For approximately 2 seconds, press
the key
i
until the display “1-10” appears on the display
above the line. The current storage place (a number
between 1 and 10) will flash shortly thereafter. Select the
storage place for your personal data by pressing the keys
“^” or “v”. Press the key
i
to confirm.
3. Select dimensional unit: The display kg / lb will appear at
the bottom right in the display. Select the unit kg or lb by
pressing the keys “^” or “v”. Press the key
i
to confirm.
4. Enter sex: The symbol for male / female will appear in the
bottom left corner of the display. Enter your sex by
pressing the keys “^” or “v”. Press the key
i
to confirm.
6
RZ_IB_Köfett_LB4 22.09.2003 11:22 Uhr Seite 6