Konica Minolta Z20 - Manual (Page 93)

93
DATE IMPRINTING
Every time a still image is recorded, it is stored with an exif tag that contains the date and time of
recording as well as shooting information. This information can be viewed with the camera in the
Quick View or playback mode, or on a computer with the DiMAGE Viewer software.
Camera Notes
The date is imprinted in the lower right corner of the
image when viewed horizontally. It is printed directly
on the photograph writing over the image
information. The date can be imprinted in three
formats: year / month / day, month / day / year, and
day / month / year. The date and date format are set
in section 2 of the setup menu (p. 87).
The date of recording can be printed directly on the image.
The imprinting function must be activated in section 2 of the
setup menu (p. 87) before the image is taken. Once
activated, the date will continue to be imprinted until the
function is reset; a yellow bar is displayed behind the frame
counter to indicate the imprinting function is active.
Date-imprinting indicator
DATE AND TIME SETUP
It is important to accurately set the clock. When a still image or a movie clip is recorded,
the date and time of the recording are saved with the image and are displayed during
playback or can be read with the supplied DiMAGE Viewer software. The date format that
is displayed or imprinted can be changed: YYYY/MM/DD (year, month, day),
MM/DD/YYYY (month, day, year), DD/MM/YYYY (day, month, year). See page 18 for
instructions on how to set the clock and calendar.
DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 93