Konica Minolta Z20 - Manual (Page 97)

97
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. Instructions on
using and installing the DiMAGE Viewer software are found in the supplied software
manual. The DiMAGE manuals do not cover the basic operation of computers or their
operating systems; please refer to the manual supplied with your computer.
Check the Konica Minolta web site for the latest compatibility information:
North America: http://kmpi.konicaminolta.us
Europe: http://www.konicaminoltaeurope.com/software/pi_customer.html
Users with Windows 98 or 98 Second Edition will need to install the driver software on
the included DiMAGE Viewer CD-ROM (p. 99). No special driver software is required for
other Windows or Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version
of the driver software included on the supplied DiMAGE Viewer CD-ROM is required for
the operation of the DiMAGE Z20 with a computer. The new software will have no affect
on the performance of older DiMAGE cameras.
A remote camera driver is supplied in the Windows edition of the DiMAGE Viewer CD-
ROM. The driver is not compatible with this camera.
SYSTEM REQUIREMENTS
For the camera to be connected directly to the computer and used as a mass-storage
device, the computer must be equipped with a USB port as a standard interface. Both the
computer and the operating system must be guaranteed by their manufacturers to
support USB interface. The following operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions.
Mac OS 9.0 ~ 9.2.2 and Mac OS X v.10.1.3 - 10.1.5, v.10.2.1 ~ 10.2.8, v.10.3 ~10.3.6.
DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 97