Loading, Selecting a cycle and temperature setting, Electing a cycle and temperature setting – Kirkland Signature 3406079 User Manual

Page 10: Oading, Cycle and temperature tips, Loading suggestions, Drying tips

Advertising
background image

10

USING YOUR DRYER

S

ELECTING A CYCLE AND TEMPERATURE SETTING

The following pages describe the drying cycles
on your dryer. The descriptions include suggested
temperature settings and drying times for various
loads.

The Cycle Control knob does not move until the
load is almost dry. After the cool-down, the knob
automatically turns to an Off area and tumbling
stops.

Cycle and temperature tips

Make sure you have selected the correct cycle
and temperature for your load.

Dry most loads using the Energy Preferred
Automatic Setting (*).

Use the No Heat Fluff cycle, or line dry rubber,
plastic, delicate, and heat-sensitive fabrics.

Loading suggestions

The chart below provides some guidelines on various types of drying loads. Load clothes loosely into the
dryer. Do not pack the dryer; allow space for clothes to tumble freely.

L

OADING

Heavy Work Clothes
3 pair pants
3 shirts
4 pair jeans
1 coverall
1 overall

Towels
10 bath towels
10 hand towels
14 wash cloths

1 bath mat

Mixed Load
3 double sheets
4 pillowcases
8 T-shirts
6 pair shorts
2 shirts
2 blouses
8 handkerchiefs

Delicates
3 camisoles
1 quilted robe
4 slips
4 panties
2 bras
2 nighties
1 baby’s dress

If some types of loads in the cycle descriptions
have more than one suggested temperature
setting, choose the lowest setting available on
your dryer.

The last few minutes of all cycles are without
heat to make the load cooler to handle.

Drying tips

Always follow care label directions when they are
available.

If you use fabric softener sheets, always use
softener sheets that are labeled as dryer safe and
follow package instructions carefully.

Remove the load from the dryer as soon as
tumbling stops to reduce wrinkling. This is
especially important for permanent press, knits,
and synthetic fabrics.

Advertising