Kodak EASYSHARE W1020 - Manual (Page 12)

6 www.kodak.com/go/support
Setting up for wireless operation
Available wireless networks are listed.
You can slide to highlight Exit without connecting then select OK (or tap Back) to
dismiss the screen and go to the Home screen, (see
page 21 ).
If you want to connect later and start enjoying your pictures now, insert a memory
card or connect a camera or other USB device with pictures (see
page 19 ).
Later—To connect later, tap Home
→
Settings
.
Slide to highlight
Network then tap Select. Highlight Scan for wireless networks then tap OK. Then
follow the screen prompts and continue with step
2 below.
If your wireless network is not found, slide to highlight My network not shown,
then select OK. Check that your router is on and your frame is close to the router,
then select Scan again. If your wireless network is still not found, your network
does not broadcast SSIDs. You then need to enter the network SSID (sometimes
called the network name) manually:
■ Select Enter SSID, then select OK.
The on-screen keyboard appears.
■ Enter the SSID in the text box ( see page 7 ). Tap Done when finished.
The person who set up your network can help you with this information. Or, tap
Back then tap Help me connect for more information.
NOTE:
If the scan finds multiple networks,
your home network (with the
highest% signal strength) is usually
listed first and highlighted.
Or, to select another network, slide or
tap below the arrows to highlight a
network, then tap OK.
Slider arrows
Slider