Kenwood DDX7034BT - Manual (Page 61)

English 61
Zone Control
You can set the front and rear audio source.
Display the Zone Control screen 1
Touch [ ] > [ ] > [Zone Control]. (page 59)
Set the Zone Control 2
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
When the rear speaker sound is switched, the audio •
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
There are following limitations when zone function is set •
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 60), <Space Enhancer> (page
61), <Position> (page 62), <DSP Bypass Control> (page
76), <Speaker Setup> (page 76), and <Car Type (DTA)
Setup> (page 77) are not available.
Space Enhancer
You can enhance the soundscape.
Display the Space Enhancer screen 1
Touch [ ] > [ ] > [Space Enhancer]. (page
59)
Set the Space Enhancer 2
1 1 1
1 Sets the soundscape level.
⁄
You cannot set Space Enhancer in tuner source. •