Kodak 6J7611A - Manual (Page 16)

2-6 A-61500 May 2010
Sensors — the scanner has 3 (ultrasonic) multi-feed detection
sensors, 1 (optical) paper path sensor and 1 (optical) paper present
sensor. These sensors detect the presence of documents in the
elevator tray and documents in the paper path during feeding and
imaging.
Rear view
Power cord connection — provides power to the scanner. The
scanner is packed with six power cords. Choose the power cord
appropriate for your location and connect it accordingly. Connect the
power cord first to the scanner, then to the wall outlet.
FireWire (IEEE-1394) connection — before connecting the FireWire
cable, be sure that power to the scanner is off. See the FireWire
instructions packed with the scanner for connection instructions. After
connection, place the cable in the retainer clip located above the
connector.
sensors
Ultrasonic
Paper
Path
sensor
Paper
Present
sensor
Power
cord
connection
IEEE-1394 connection Retainer clip