Kodak 6J7611A - Manual (Page 45)

5-6 A-61500 May 2010
10. Reinstall the separation roller.
Cleaning the feed module tires
11. Lift up the printer access cover.
12. Push the release lever down (located underneath the printer access
cover) to release and remove the feed module.
13. Manually rotate and wipe the feed module tires with a roller cleaning
pad. For best results wipe parallel to the ribs in order to remove any
residue between the ribs.
14. Inspect the tires. If the tires show signs of wear or damage, replace
the feed module tires. See “Replacement procedures” later in this
chapter.