Attaching the wrist strap, Loading the batteries, Attaching the wrist strap loading the batteries – Kodak CX4230 User Manual
Page 12
4
Chapter 1
Attaching the Wrist Strap
1
Thread the short loop of the strap through
the wrist strap post.
2
Thread the long end of the strap through the
short loop. Pull until secure.
Loading the Batteries
A KODAK CRV3 Lithium Battery, or equivalent, is included with your camera.*
1
Turn off the camera.
2
On the bottom of the camera, slide the
battery door and lift to open.
3
Insert the CRV3 Lithium battery or 2, AA
batteries.*
4
Close the battery door.
IMPORTANT BATTERY INFORMATION
For acceptable battery life and to make sure your camera operates
dependably, do not use alkaline batteries.
See
for the types of batteries you can use in your camera.
* If your camera was packaged with a KODAK EASYSHARE Camera Dock II, see
for details on using the KODAK EASYSHARE Ni-MH Rechargeable
Battery Pack.
OPE
N
or