Kodak CX4230 - Manual (Page 32)

24
Chapter 2
Turning Off the Orientation Sensor
If you turn the camera when you take a picture (for example, to take a
lengthwise or portrait, shot), the Orientation Sensor repositions the picture so
it is displayed correct side up during Quickview, Review, picture transfer, and
in video-out display.
The Orientation Sensor is turned on as the factory default. You can turn it off so
that pictures are displayed in the same orientation as they are taken.
1 In Capture mode, press the Menu button.
2 Highlight Orientation , then press the Select button.
3 Highlight Off, then press the Select button.
4 Press the Menu button to turn off the menu.
This setting remains until you change it.