Kyocera FS-C8008N - Manual (Page 14)

12
Print overrun
Press GO
†††
The print job transferred to the printer was
too complex to print on a page. Press the
GO key to resume printing. (The page may
break in some pages.).
You can abandon printing by the CANCEL
key.
If Auto Continue is set to On, printing will
be automatically resumed after a preset
period of time.
RAM disk error##
Press GO
A RAM disk error has occurred. Look at
the error code given in place of ## and
refer to chapter 4 of the Operation Guide.
To ignore the RAM disk error, press the
GO key.
Remove paper
Finisher tray ##
Paper remains in an option document fin-
isher as displayed in place of ##. Remove
printed pages.
Remove paper
sorter tray ##
Paper remains in an option sorter tray as
displayed in place of ##. Remove printed
pages.
Replace toner
C, M, Y, K
Toner has run out in the toner container(s).
Replace the toner container using a new
toner kit for the particular color. The printer
does not operate when this message is
displayed.
For example, if Replace toner C,K is
displayed, replace the cyan and the black
toner containers.
Set paper
Press GO
The MP tray is out of paper. Load paper
and press the GO key. (Note that feeding
the paper having a paper size which does
not match the current paper size from the
MP tray can cause paper jam.)
Message Corrective Action
Fsc8008q.fm 12 ページ ２００２年１２月１１日 水曜日 午後２時３９分