Kyocera FS-C8008N User Manual

Page 9

Advertising
background image

7

Format error
Hard disk

The hard disk installed in the printer is not

formatted, and therefore cannot be read or

written. To format the hard disk, follow the

procedure in the Installation Guide of the

hard disk.

Hard disk err ##
Press GO

A hard disk error has occurred. Look at the

error code given in place of ## and refer to

chapter 4 of the Operation Guide. To ignore

the hard disk error, press the GO key.

I/F occupied

This message is displayed when you

attempt to use the printer’s operator panel

to change the environmental settings on

the interface from which data are presently

being received.

ID error

The user ID entered for a private job, or a

stored job is not correct. Check the user ID

that you specified on the printer driver.

Incorrect slot
Please reinstall

The optional hard disk is installed in the

network interface card slot (OPT) in the

printer.
The optional network interface card is

installed in the hard disk slot (HDD) in the

printer.
Install it in the appropriate slot.

Insert the same
memory card

You have inserted the wrong memory card

when the Insert again message was

displayed. Remove the wrong memory

card from the printer’s memory card slot

and insert the correct memory card. The

printer again reads it from the beginning of

the data.

Message

Corrective Action

Fsc8008q.fm 7 ページ 2002年12月11日 水曜日 午後2時39分

Advertising