Kenwood ProTalk XLS TK-3130 - Manual (Page 13)

7
1 Plug the AC adapter cable into
the adapter jack located on the
rear of the charger.
2 Plug the AC adapter into an AC
outlet.
3 Slide a battery pack using the
supplied holder or a transceiver
equipped with a battery pack
into the battery pack slot.
• Make sure the metal contacts of
the battery pack mate securely
with the charger terminals.
• The indicator lights red and
charging starts.
4 When charging is completed,
the indicator lights green.
Remove the battery pack or the
transceiver from the battery
pack slot.
• It takes approximately 2.5 hours
to charge the battery pack.
• When the charger will not be
used for a long time, unplug the
AC adapter from the AC outlet.