KTI Networks NS-32LB451A11 - Manual (Page 27)

21
Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
Wired connection
To connect your TV/Blu-ray combo using a wired
router:
• Connect an Ethernet cable (CAT5 or better with an
RJ45 connector) to the ETHERNET jack on the
back of your TV/Blu-ray combo and to an Ethernet
jack on a router.
Wireless connection
The network configuration and connection method
may vary depending on the equipment in use and
the network environment. Your TV/Blu-ray combo is
equipped with an IEEE 802.11n (Wi-Fi) wireless
module, which also supports the 802.11b/g
standards. For the best wireless performance, we
recommend using a IEEE 802.11n certified Wi-Fi
network (access point or wireless router).
To connect a wireless access point or router:
• See “Configuring a wireless Internet connection”
on page 55.
Note
When plugging or unplugging the cable, hold the
connector on the end of the cable. When
unplugging, do not pull on the cable. Press down the
lock tab and pull the connector out of the jack.
ETHERNET POR
T
(BD Liv
e s tor
a ge only)
HDMI3
INPUT
Back of TV/Blu-ray combo
Ethernet cable
Incoming
broadband
Internet
connection
Wired router
Back of TV/Blu-ray combo
Wi-Fi
antenna
Wireless router or access point
Incoming
broadband Internet
connection
Computer