KTI Networks NS-32LB451A11 - Manual (Page 50)

44
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
Using the Blu-ray Disc player
Playable discs
About Blu-ray Discs
The massive storage capacity of a Blu-ray Disc
allows a higher standard of picture and audio
quality and a wealth of special effects and
enhanced features not available on DVDs.
Java™
Your TV/Blu-ray combo features Java support so
you can get the most out of the latest Blu-ray Discs.
When a Blu-ray Disc loads, explore the title menu to
enjoy these extra features.
Color buttons
The red, green, yellow, and blue buttons on the
remote control are used with interactive menus
when operating a Blu-ray Disc that includes Java
applications. For more information about using this
type of disc, see the instructions that came with the
disc.
Playing a disc
To play a disc:
1 Turn on your TV/Blu-ray combo.
2 Press INPUT, press or to highlight BLU-RAY,
then press ENTER.
3 Insert a disc in the disc slot with the label (if the
disc has one) facing forward. Hold the disc
without touching either of its surfaces, align it
with the guides, and gently push it in.
4 If the disc does not start playing automatically,
press (play).
5 If a Blu-ray Disc or DVD menu opens, press
or to select PLAY, then press ENTER.
6 To eject the disc, press EJECT/CLOSE .
Controlling disc playback
To control disc playback:
• To pause playback, press (pause). Press this
button or (play) to resume normal playback.
• To stop playback, press (stop). The Setup
menu opens. To resume playback, press
or to select DVD/BD-ROM, then
press ENTER. Depending on the disc, playback
starts where it stopped or at the beginning of
the disc. If you press (stop) twice, playback
stops completely. To start playback again,
press
(play).
• To fast forward or fast reverse, press or .
Each time you press one of these buttons, the
fast-forward or fast-reverse speed increases
from Fast X2, Fast X4, Fast X8, Fast X16, Fast
X32, Fast X64, to Fast X128. Press (play) to
resume normal playback.
• To go to the previous chapter, press within
two seconds after the current chapter starts.
To go to the beginning of the current chapter,
press
anytime after playing the first two
seconds of the chapter.
• To go to the next chapter, press .
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Disc type Logo Disc type Logo
Blu-ray Disc DVD-R
DVD-video
(DVD-ROM) Audio CD (CDDA)
DVD-RW MP3/WMA
Notes
• Writeable DVDs (DVD-RW or DVD-R) must be
finalized, VR mode only.
• Playback may not work for some types of discs,
or when specific operations, such as changing
the angle or aspect ratio, are being performed.
Information about the disc is on the disc or disc
packaging.
• Do not let the disc become dirty or scratched.
Fingerprints, dirt, dust, scratches, or cigarette
smoke on the recording surface may make it
impossible to use the disc for playback.
• Your TV/Blu-ray combo can play CD-R/-RW and
DVD-RW/-R recorded with UDF or ISO9660
format.
• Windows Media Audio (WMA) files must be
written to the disc with a .wma file extension in
order to be recognized and played back
correctly.
• High bit-rate or variable bit-rate .wma files may
not play back correctly.
Note
If a Disc is inserted during some modes other than
Blu-ray mode, it may switch to Blu-ray mode and start
playback automatically.
Note
If you eject a disc from the disc slot, then change to a
different video input source or turn off your
TV/Blu-ray combo, you cannot insert a disc into the
disc slot.
Notes
Not all Blu-ray Discs support the resume feature.
Note
If appears on the screen, the operation you are
trying is not allowed by your TV/Blu-ray combo or
the disc. For example, most discs will not let you fast
forward through the warning information at the
beginning of a title.