Kenwood KS-208HT - Manual (Page 5)

5 EN
ENGLISH
KS-308HT/208HT 1209/02-06/EN
SPEAKERS (6-16 Ω)
1. Twist wire’s
conductor
4. Release 3. Insert the
conductor
2. Push
(–) (+) Red
Center speaker
Surround
speakers
(–) (+)
Gray
(–) Blue
(+)
Right Left
Left Right
Speaker terminals
(Amplifier or receiver)
(–) (+) Green
(–) White
(+)
Connections
The speaker wires and labels of speakers’ back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
Front speakers ➤ ➤
1. The speaker system’s maximum input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wires together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
Wire with white line