Kenwood UKDC-X7533U User Manual
Page 29
English
|
29
Function of the KDC-X7533U
In Standby mode
Built-in Amp Setting
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
Display
Setting
"AMP ON"
The built-in amplifier activates.
"AMP OFF"
The built-in amplifier deactivates.
Function of the KDC-X7533U
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
Setting the Front channel and Rear channel
sound in the Dual Zone System.
Display
Setting
"ZONE2 R"
Sub source (Auxiliary input source) is to be rear
channel.
"ZONE2 F"
Sub source (Auxiliary input source) is to be front
channel.
Function of the KDC-X7533U
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display
Setting
"BMS FLT"
Bass boost level is flat.
"BMS +6"
Bass boost level is low (+6dB).
"BMS +12"
Bass boost level is mid (+12dB).
"BMS +18"
Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers, there are the models you can set from
Flat to +18 dB, and the models you can set from Flat
to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "BMS +18" will not work
correctly even if it is selected.
Function of the KDC-X7533U
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display
Setting
"BMSF NML"
Boost with the normal central frequency.
"BMSF LOW"
Drop the normal central frequency 20%.
Function of the KDC-X7533U
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Push the Control knob towards [FM] or [AM].
Select the "AMP CTRL" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards [
4] or
[
¢].
5
Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.