Keys Fitness KF-3.5T - Manual (Page 5)

5
Assembly: Parts Identifier
The Keys Fitness KF-3.5T Treadmill will require assembly before operating. Place unopened
box on a clean, level surface. After opening the box, remove any packing material from the
treadmill.
Do not throw away any packing materials until the unit is working properly.
Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call 888-340-0482.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench- 3/16”
2. Allen Wrench- 7/32”
3. Phillips Screwdriver
U4T1 U4T4 U4T5 U2D1
UAS29 UAS30 U4J24 U4J5 U4J27
UAW8 UAW9 UAW10 U4J28
U4J7
UAT6 UAT7
U4T11 U4J4
Ref # Description Qty Ref # Description Qty
U4T1 MAIN FRAME 1 U4J24 SCREW ST4.2*12 6
U4T4 LEFT UPRIGHT 1 U4J5 BOLT M10x25 12
U4T5 RIGHT UPRIGHT 1 UAJ7 BOLT M8x52 5
U4D1 CONSOLE 1 U4J28 SAWTOOTH WASHER #8 6
UAS29 LEFT PROTECTION COVER 1 U4J27 SAWTOOTH WASHER #10 12
UAS30 RIGHT PROTECTION COVER 1 UAW8 #6 ALLEN WRENCH 1
UAT6 LEFT HANDLEBAR 1 UAW9 #5 ALLEN WRENCH 1
UAT7 RIGHT HANDLEBAR 1 UAW10 WRENCH W/SCREW DRIVER 1
U4T11 CROSS BAR 1 U4J4 BOLT M8X26 1