Kenwood XXV-05V - Manual (Page 51)

English 51
Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
9 Selects a speaker to be set.
(see <Speaker Set Up>, page 52)
p Selects a speaker type.
(see <Speaker Set Up>, page 52)
q Stores your setup in memory.
(see <Speaker Setup Memory>, page 55)
w Displays the Speaker Crossover Setup screen.
(See <Crossover Network Setup>, page 55)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
e Set the use or no use of tweeter.
(see <Speaker Set Up>, page 52)
r Displays the Channel Level Setup screen.
t Displays the Car Type Set Up screen.
y Selects a speaker to be set.
(see <Channel Level>, page 53)
u Sets the speaker volume.
(see <Channel Level>, page 53)
i Starts or stops test signal tone output for setup
check.
o Displays the Speaker Set Up screen.
Your setup on the <Sound Effects Menu> is
adjusted automatically to get the best sound
effects according to the car type and speaker you
have set on the <Audio Set Up> (see page 50). We
recommend you to complete the <Audio Set Up>
first, then set up the <Sound Effects Menu>.
You can fine-tune the automatic set value by <DTA
Setup> (see page 54), <Crossover Network Setup>
(see page 55), or <Parametric Equalizer> (see page
81).
Use
9
11
10 10
12
13
14 15
+10 dB +1
16
19
17 17
18