Kubota 7780 - Manual (Page 2)

Max. 22,000 rpm/52,490 xg
Max. 4 Liters
Foot switch
(Optional)
The lid opens automatically when the
switch is pressed. A newly designed gas
spring produces smooth and quick
opening, while hands-free opening makes
the experiments easier.
Features
■ High Capacity Rotor
Aluminium Rotor of 4 x 1 Liter at 15,760 xg
■ Auto Interlock Lid
Lid can be opened/closed using one hand.
• To close lid
Push slightly and the lid locks automatically by an electrical
interlock system
• To open lid
Press the lid open key and the lid opens automatically after
releasing the interlock.
A foot switch
(optional) also enables hands-free lid opening.
■ Easy-to-use and convenient functions
• Memory flashing function for easy spin-down (Patent pending)
Automatically memorizes the duration of spin-down operation
ranging from 1 to 90 seconds. Merely pressing the key the
next time starts the spin-down procedure for the memorized
duration.
• Twenty (20) operation condition memory settings are
available, with one-touch saving, access and operation
possible.
• Equipped with a tachometer port to comply with GMP
requirements. Actual rotor speed is easy to check.
• Acceleration and deceleration curve can be varied in three
steps according to the type of sample and experimental
conditions.
• RCF (xg)-set operation function and stepped centrifugal force
function
• Integrator function that can attain optimization of centrifuging
conditions. G·sec value (integrated RCF value) can be
measured and the operation with this value set is possible.
• The timer can be set up to 990 minutes or seconds. During
hold operation, the elapsed time of operation is displayed.
• Pre-cooling function enables the rotor to reach low
temperatures before the experiments.
AG-1K4 Fixed Angle Rotor
4 x 1 Liter
Light weight (made of Aluminium)
(30% less than AG-5006 6x500mL in weight)