Kathrein UFE 371/S - Manual (Page 19)

Installation Menu
19
Installation Menu
Adjusting the receiver to your receiving installation:
1) Antenna alignment
Select 5 V power supply (On/Off) for the antenna
2) Scan
Auto Scan (overall search), Net Scan (network search), TP
Scan (specific channels) and PID Scan (search for one
specific programme, using the PID).
4) System setup
Adjustment to your TV set and other individual settings, or
reset to factory setting: You can restore the factory setting
your receiver was delivered with (factory reset).
Attention! In this case, all the changes you may have made to the
programming of the receivers will be deleted.
6) Parental lock
Locking access to the menu and changing the password
Note: The receiver is preassigned and delivered with the installation
menu protected by the password “0000”.