Kathrein UFE 371/S - Manual (Page 8)

Remote Control
8
Using the Remote Control
You can use the OK key to confirm the individual settings in the
menus or to call up sub-menus.
Change each setting line by line, and confirm the entry by pressing
the OK key.
Press EXIT key to leave the menu, or change from a sub-menu to ist
respective main menu.
Use the
/ keys to navigate through the menus. Use the / keys
to enter the individual requirements. You can also enter the values in
the appropriate fields using the numeric keypad.
The coloured keys are used for the functions within the various sub-
menus. The functions of the respective menu are displayed on the
screen.
A line in which the individual functions are explained appears in each
menu.
Inserting Batteries in the Remote Control
Remove the cover on the rear of the remote control. Insert the two
batteries supplied into the remote control, ensuring correct polarity
which is shown on the base of the battery compartment.
Slide the cover back onto the housing until it locks in place.
Used batteries are special waste. Do not throw used batteries
into your household waste; take them to a collection point for old
batteries!
Electronic equipment is not household waste - in accordance with
directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE
COUNCIL dated 27
th
January 2003 on used electrical and electronic
equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a designated
public collection point.