5 installing the software, Install the software, Installing the software – Kodak DX3500 User Manual
Page 43
35
5
Installing the Software
Make sure that you install the software from the KODAK Picture Software CD
before you transfer pictures from your camera to the computer.
Install the Software
1
Before you begin, close all software applications running on your
computer.
2
Place the KODAK Picture Software CD into the CD-ROM drive.
3
Load the software:
On a WINDOWS-based computer—usually, the first install window
automatically appears. If it does not, choose Run from the Start menu and
type the drive letter that contains the CD followed by \setup.exe. For
example: d:\setup.exe
On a MACINTOSH computer—click Continue on the install window that
automatically appears.
4
Follow the on-screen instructions to install the software. If prompted,
restart the computer when the installation is complete.
To install all applications on the CD, select Typical when prompted.
To choose the applications you wish to install, select Custom when
prompted. See
for a description of the applications that are
included on the CD.
NOTE: Take a few minutes to electronically register your camera and software
when you are prompted to do so. This allows you to receive information
regarding software updates, and registers some of the products
included with the camera.
You must be connected to your Internet service provider to register
electronically.