Konica Minolta Magicolor 2450 - Manual (Page 67)

Media Types 53
Media Types
Before purchasing a large quantity of special media, do a trial print with the
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper
Use plain paper that is
„ Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
„ Coated with a processed surface (such as carbon paper, digitally gloss-
coated media, and colored paper that has been treated)
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
„ Designed specifically for inkjet printers (such as superfine paper, glossy
film, and postcards)
„ Already been printed on by another printer, copier, or fax machine
„ Dusty
„ Wet (or damp)
Capacity Tray 1 Up to 200 sheets, depending on the paper
weight
Tray 2 Up to 500 sheets, depending on the paper
weight
Orientation Face up
Driver
Media Type
Plain paper
Weight 60 to 90 g/m² (16 to 24 lb bond)
Duplexing See page 52 for supported sizes.