Konica Minolta Magicolor 2450 - Manual (Page 88)

Output Tray 74
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
1
Load plain paper into the tray.
2
From the printer driver, specify the layout for duplex printing.
3
Click OK.
"
With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 200 sheets (A4/Letter) of 80 g/m
2
(22 lb) paper.
"
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
"
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
1
1
2
3
3
3
1
1
2