Kenwood KDC BT948HD - Manual (Page 34)

34
| KDC-X995/ KDC-BT948HD
Display Settings
Customization of Clock Display Mode
You can customize the display of the Clock Display
mode.
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Display Setting mode and Select the
Clock Display
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”
> “DISP & ILLUMI” > “Display
Select” > “Type Select” > Clock Display mode.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Setting
“Display Select”
“Type Select” Selects the Clock Display mode.
“Graphic
Select”
Switches between single and dual clock.
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Illumination Color Selection
Selecting the Illumination Color of the panel.
1
Enter Menu List mode
Press the [MENU] button.
2
Enter Illumination color selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”
> “DISP & ILLUMI” > “Color
Select”.
3
Select the place where you want to set the
Illumination Color
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Place
“All” Display and key
“Display” Display
“Key” Key
4
Select the Illumination Color
Turn the [VOL] knob and press it when the
desired item is displayed.
Select the color from “Variable Scan”/ “Color1” —
“Color 24”/ “User”.
Creating “User” color
You can create your original color during the
selection from “Color1” — “Color24.”
The color you created can be called when you
select “User”.
1. Press the [VOL] knob for at least 1 second.
Enter the detail color adjustment mode.
2. Set the color.
Operation type Operation
To select the color to adjust.
(red, green, or blue)
Press the [ 4 ] or [ ¢ ] button.
To adjust color.
(Range: 0 – 9)
Turn the [VOL] knob.
3. Press the [VOL] knob.
Exit the detail color adjustment mode.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.