Kenmore 625.3485500 User Manual

Page 9

Advertising
background image

WATER SOFTENER START-UP

SECTION 1

9

1E.

FILL THE STORAGE TANK WITH SALT

Brine (salt dissolved in water) is needed for each

and every regeneration. The water for making

brine is metered into the salt storage tank by the

softener. However, you must keep the tank filled

with salt.

Fill the tank with NUGGET or PELLET water

softener salt. DO NOT use rock salts, as they

have dirt and sediments that will stop the

softener from working.

Before filling, be sure the brinewell cover is in

place on the top of the brinewell. Salt storage

capacity is shown on page 19. Be sure to set the

salt monitor system (see page 10).

NOTES:
The salt monitor system page 10, is calibrated to

the density of nugget or pellet water softener

salt. The monitor will not work as accurately

with other types of salt including rock and solar.

In humid areas, it is best to fill the storage tank

half-full, and to refill it more often. Salt bridging

(see page 15) occurs more often when conditions

are humid.

WATER SOFTENING SALT WITH IRON RE-

MOVING ADDITIVES — Some salts have an

additive to help the softener handle iron in the

water supply. Although this additive may help

to keep the softener resin clean, it may also

release corrosive fumes that will weaken and

shorten the life of some softener parts.

FIG. 3

ADD SALT

Sodium information: Water softeners using so-

dium chloride for regeneration add sodium to

the water. Persons who are on sodium restricted

diets should consider the added sodium as part

of their overall sodium intake.

For example, if your water supply is 15 grains

hard, you would have to drink 3 quarts of

softened water to consume 335 milligrams of

sodium. That is equivalent to eating 2-1/2 slices

of white bread.

Persons who are concerned about their drinking

water should consider a Sears Drinking Water

System that will remove or reduce in excess of

90% of the sodium and other drinking water

contaminants.

You have now finished the water softener start up. After the sanitizing recharge, on

page 8, the softener will be giving you soft water.

Advertising
This manual is related to the following products: