Keys Fitness KF-T2-0 - Manual (Page 6)

6
www . keys
fitness.com
Assembly
1
ALLEN BOLT M8*15*15
ALLEN BOLT M8*55
WASHER 9*16*1.6mm
ALLEN BOLT M8*15*15
ALLEN BOLT M8*55
WASHER 9*16*1.6mm
ASSEMBLY FOR uPRIGhT TuBES
Step 1:
After unpacking the box, lift up the upright
tubes so that the screw holes are aligned.
Step 2:
Secure the upright connection with allen bolts
M8*55 (Qty 6) and flat washers 9*16*1.6 mm
(Qty 6) at the upright tubes. In the same area
you will need to use allen bolts M8*15*15 (Qty
4) and flat washers 9*16*1.6 mm (Qty 4) to
secure as well.
Note: Hand tighten bolts until console
is attached and secure as indicated in
page 8. Then tighten with tool provided.
Note: Be careful not to pinch the wire
harness.
LEFT FENDER RIGHT FENDER
CONSOLE
SAFETY KEY
TOOL
6MM
MAIN FRAME
FENDER
SCREW/MISC
END CAP LEFT END CAP RIGHT
ALLEN BOLTS M8*55
WASHER 9* 16* 1.6MM
ALLEN BOLTS
M8*15*15
PHILLIPS SCREW M6*30
WASHER 6.6* 12* 1.6MM
PHILLIPS SCREW M6*20
PHILLIPS SCREW ST4.2*16
WASHER 11* 20*2MM
PHILLIPS SCREW ST4.2*13