Kenwood KRF-V9993D - Manual (Page 35)

29
Chapter One : Connecting Your Devices
Connections
Connecting a Camcorder or Additional VCR
This section focuses on the connections from your
camcorder or VCR to the front of the VR-4900/VR-4700/
KRF-V9993D. Please refer to your camcorder or VCR’s in-
structions for more detail about its connection jacks and
capabilities.
These instructions describe how to connect a camcorder or
VCR quickly and probably temporarily to the front of the
receiver. If you want a less cluttered and more permanent
connection, see “Can I Connect an Additional VCR Perma-
nently?”, below.
To Connect a Camcorder or Additional VCR:
Connect the audio and video cables from the camcorder or
VCR’s Audio and Video jacks to the receiver’s front panel
jacks as shown to the left.
Can I Connect an Additional VCR
Permanently?
Yes. To do so, follow the instructions under “To Connect a
Secondary VCR:” on page␣ 13.
DOOR
OPEN/CLOSE
VOLUME CONTROL
DOWN UP
S VIDEO VIDEO L - AUDIO - R
PRO LOGIC 3 STEREO
AV AUX
VIDEO OUT
S-VIDEO OUT
AUDIO OUT
(or additional VCR)