Kenwood KRF-V9993D - Manual (Page 45)

39
R
emote Setup
Chapter Two : Setting Up PowerTouch
What if my device does not work with any
of the codes on the list?
What if I Want PowerTouch to Control
Additional Functions?
PowerTouch contains sophisticated features that allow it to
“learn” new commands from other IR remotes. If none of
the codes for the device and brand you select work, use this
feature to instruct PowerTouch how to operate the device.
You can also use this feature to modify commands for codes
that do work or even to add extra functionality to those
codes.
For example, let’s say the basic control codes for your VCR
are Power, Play, Rewind, Fast Forward, Pause, Channel and
Record. Let’s also say that your VCR has an OSD (On Screen
Display) menu that is not part of the default code set you
chose. You can use your VCR’s remote to teach PowerTouch
to access that menu.
To teach PowerTouch new commands:
1. Follow the steps under “How Do I Identify Devices?” on
page␣ 37.
2. Touch to open the Function Change menu:
3. Select the button to be programmed by learning (In-
clude “Empty 1 to Empty 8”).
You will be able to access these new commands by touch-
ing More or the button you assign on any device control
screen. (Users’ Guide)
4. When a button which can be renamed is selected,
(Name Input) button is displayed with black charac-
ters. Touch to deisplay the keyboard and enter the
button name (Example: CD: On). If characters already
have been enterd, touch to erase them. (See “How
Do I Enter Text?” on page 8 of the Users’ Guide.)
Then touch on the keyboard display to establish
the entry.
5. Touch the Learn button.
While “Learn” is displayed, perform the next operation.
If the set is left untouched for more than one minute,
“Time Out” will be displayed.
6. Aim the device’s remote at PowerTouch and press and
hold the button on the device’s remote that corresponds
to the command you want PowerTouch to learn:
This may take a few seconds; do not move PowerTouch
or the device’s remote until PowerTouch displays the
Function Change menu again.
• “Learn Success” is displayed when learning completes
successfully.
4 inches (10 cm)
BACKLIGHT
• “Lean Fail” is displayed when it failed.
After a learning process is completed, always touch
to test the command or function that PowerTouch has
learned. If the command or function does not work,
perform the learning process again.
Be sure to use the device’s original remote. PowerTouch
will not learn commands from other universal remotes.
7. Repeat steps 3 through 5 until you have taught
PowerTouch all the commands you want it to know. If
you need more function lines, touch or to ac-
cess more lines.
8. Touch to return to the IR Setup menu.
9. Touch to return to the Setup menu.
Depending on the remote control unit, "Learn" may not
be possible.