Kenwood CX-SR10 - Manual (Page 13)

2. Route the cable between the roof and the tailgate to the inside. Take advantage
of any existing cable channel or wiring conduit.
3. There are two alternative methods to route the cable under the headliner and to
the receiver:
a. The cable may be routed to the cable channel, lift up the channel and go
through the small opening and push the cable directly between sheet metal
and headliner. This option is recommended. The cable and the receiver may
be concealed behind the interior trim in the back of the vehicle.
Figure 26: Cable routed through roof end and tailgate under the rubber molding
b. Alternatively, the cable may be hidden under the rubber molding following the
metal groove underneath the molding to the interior.
Figure 27: Hiding the cable under the rubber molding
Figure 28: Going inside under the interior trim
13
It is important that the coaxial cable does not become damaged
or kinked during the installation procedure.