Kenwood CX-SR10 - Manual (Page 5)

Shortening the antenna "tail"
The antenna module is supplied with a 6 inch tail. For vehicles with flat roofs (SUVs,
Mini-vans) and for convertibles, it is possible to shorten the tail by up to 2 inches.
NOTE: For vvehicles w
with aa ssloping rroof, oor iif tthe m module iis m mounted oon tthe ttrunk oof aa
convertible, tthe ttail sshould nnot bbe sshortened!
Figure 4: Shortening the antenna tail
After the precise length of the tail has been determined, the adhesive strip may be
cut to length and applied to the antenna tail.
Figure 5: Applying adhesive tape
Removing the antenna
The antenna module may be removed, using a nylon cord (e.g. fishing line) to cut
through the adhesive pad between the antenna module and the vehicle. Work from
the front to the tail in a side-to-side cutting motion. Any remaining adhesive may be
removed with an appropriate cleaner.
Figure 6: Removing antenna
5