Konica Minolta bizhub C10P - Manual (Page 138)

Solving Problems with Printing Quality 126
There are
toner
smudges or
residual
images. One or more of the
toner cartridges are
defective or installed
incorrectly. Remove the toner cartridges and
check each for damage. If one or more
is damaged, replace it.
The fuser separator
levers are adjusted
for envelope printing. Return the fuse separator levers to the
plain paper setting.
There are
toner
smudges on
the back side
of the page
(whether or
not it has
been
duplexed). The media transfer
roller is dirty. Clean the media transfer roller.
If you think the transfer roller should be
replaced, contact Technical Support
with the error information.
The media path is
dirty with toner. Print several blank sheets and the
excess toner should disappear.
One or more of the
toner cartridges are
defective. Remove the toner cartridges and
check each for damage. If one or more
is damaged, replace it.
The drum cartridge is
defective. Remove the drum cartridge and check
for damage. If it is damaged, replace it.
Abnormal
areas (white,
black, or
color) appear
in a regular
pattern. The laser lens is dirty. Clean the laser lens.
A toner cartridge may
be defective.
Remove the toner cartridge with the
color causing the abnormal image.
Replace it with a new toner cartridge.
The drum cartridge is
defective. Remove the drum cartridge and check
for damage. If it is damaged, replace it.
Symptom Cause Solution