Konica Minolta bizhub C10P - Manual (Page 53)

Configuration Menu Overview 41
NET
ZONE
Settings ✱
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum
of 16 characters.
NET
ZONE2
Settings
-
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum
of 16 characters.
ETHERNET
SPEED
Settings
AUTO /100 FULL DUPLEX/
100 HALF DUPLEX/
10 FULL DUPLEX/
10 HALF DUPLEX
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
PS
PROTOCOL
Settings
BINARY /QUOTED BINARY
Select whether PostScript jobs are received in the
binary format or the quoted format.
USB ENABLE
Settings
YES /NO
If YES is selected, USB is enabled.
If NO is selected, USB is disabled.
JOB
TIMEOUT
Settings
0-60-999
Specify the length of time (in seconds) until the print
job being received is timed out when USB is being
used.
PARAL-
LEL
JOB
TIMEOUT
Settings
0-30-999
Specify the length of time (in seconds) until the print
job being received is timed out when Parallel is
being used.
ACTIVE
I/F
Settings
ETHERNET /PARALLEL
Specify the interface to be used.
An Ethernet and parallel connection cannot be used at the same
time.