Konka Group Z1 - Manual (Page 13)

13
INSERTING BATTERIES
Insert the batteries as indicated on the diagram on the inside of
the battery-chamber door. Confirm the positive and negative
battery terminals are oriented correctly.
To open the battery-chamber door, slide the lock to the open
position (1). Slide the door the the side of the camera (2) to
release the safety catch. Lift the door to open (3).
This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types
of AA batteries. The camera should be off when replacing batteries.
1
2
3
Close the battery-chamber door and slide it toward the body (4) to
engage the safety catch. Slide the batter-chamber lock to the
close position (5).
After installing the batteries, the set-time/date message may
appear on the monitor. The clock and calendar are set in section
3 of the setup menu (p. 18).
4
5