Konka Group Z1 - Manual (Page 26)

26 B ASIC RECORDING
Autoflash
Fill-flash
Slow sync.
Autoflash with
red-eye reduction
To use the built-in flash, simply raise it (1).
Lower the flash unit to prevent it from firing.
To change the flash mode, simply press the
flash mode button (2) until the appropriate mode
is indicated.
Autoflash - the flash fires automatically in low-
light and backlit conditions.
Red-eye reduction - multiple flashes are used
before the main flash burst to reduce red-eye;
an effect caused by light reflected from the
retina. Use in low-light conditions when taking
photographs of people or animals. The pre-
flashes contract the pupils of the subject’s eyes.
Fill-flash - the flash fires with each exposure
regardless of the amount of ambient light. Fill-
flash can be used to reduce harsh shadows
caused by strong direct light or sunshine.
Slow sync. - flash and ambient light exposures
are balanced. Use slow sync. when in dark
locations to reveal background details. Ask your
subject not to move after the flash burst; the
shutter may still be open for the background
exposure. Because exposures can be long, the
use of a tripod is recommended.
Flash cancel - the flash is down and cannot fire.
FLASH MODES
1
2
Fill-flash
Flash cancel