Konftel 60W - Manual (Page 17)

ENGLISH
A c c e s s o r y : B l u e t o o t h a d a p t e r
15
Connection
Power supply
Loudspeakers, x3
Microphone, 360° sound pick-up LEDs
Blue – the microphone is on
Blue flash – pairing
Red – the microphone is muted
Only mains transformers
of types Helms-Man
DEN4824129,
DPX481821 (USA) or
DBN4824129 (UK) may
be connected.
USB Bluetooth adapter
Placement
You can place your Konftel 60W up to 10 metres from the
telephone or computer. To achieve optimal performance, the
distance between the Konftel 60W and the phone should not
exceed 5 meters.
Pairing with Bluetooth adapter
Install and prepare the Bluetooth adapter on your computer as
described in the instruction manual.
Press the Tuning button for 4 seconds until the LEDs start
flashing and you hear 2 beeps from the Konftel 60W.
Add the Konftel 60W as a headset device to “My Bluetooth
Place”. Select the Konftel 60W on the device list of the
Bluetooth adapter. Enter the passkey “0000”. If the pairing is
successful, you will hear a short tone and the LEDs will stop
flashing.
Volume control
Select Volume control from the Start Menu:
Start > Control panel > Sounds and Audio Devices.
Enter the tab Audio and make sure that the Bluetooth audio is
the default device.
4 sec.
230 V / 120 V (USA)
power socket