Kenwood DPX701 DPX501 - Manual (Page 54)

54 | English
Connecting Wires to Terminals
AUX IN
SUB
WOOFER
REMO.CONT
– +
P.CONT
MUTE
ANT. CONT
ILLUMI
FRONT L
FRONT R
REAR L
REAR R
EXT. CONT
FM/AM
antenna input
Front left output (White)
Front right output (Red)
Fuse (10A)
To Kenwood disc
changer/ External
optional accessory
Wiring harness
(Accessory
1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left
speaker
To front right
speaker
To rear right
speaker
To rear left
speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse box
Battery
If no connections are made, do not let the wire come out from the tab.
To connect these leads, refer to the
relevant instruction manuals.
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Dimmer control wire (Orange / White)
When using the optional power amplifier, connect
to its power control terminal.
To car light control switch
Depending on what antenna you are using,
connect either to the control terminal of the
motor antenna, or to the power terminal for the
booster amplifier of the film-type antenna.
Sub Woofer left output (White)
(DPX701 only)
Sub Woofer right output (Red))
(DPX701 only)
TEL mute wire (Brown) Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To connect the Kenwood navigation
system, consult your navigation manual.
AUX left input (White)
AUX right input (Red)
Steering remote control
(Light Blue/Yellow)
(DPX701 only)
Rear left output (White) (DPX701/DPX501)/
Sub Woofer left output (White) (DPX501 only)
Rear right output (Red) (DPX701/DPX501)/
Sub Woofer right output (Red) (DPX501 only)
To use the steering
wheel remote control
feature, you need to
an exclusive remote
adapter (not supplied)
matches your car is
required.
External amplifier control wire
(Pink/Black) (DPX701 only)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.