KORG EFGS 1 - Manual (Page 23)

23
Editing an effect
For each effect, you can select the effect type and set its parameter values.
Pressing the UTILITY(ENTER) button repeatedly will turn the effect on or off.
If you select the effect type using the C or D button for an effect that is turned
off, that effect will automatically be turned on.
If a program was not written after it was edited, the decimal
point of the program number will light.
Before
writing
After
writing
The edited settings will return to the settings of the orig‐
inal program if you switch programs or turn off the
power without Writing.
For details on the effect types and parameters, refer to Effect
Parameters (p.34).
To exit Edit mode, press the PLAY/EDIT(EXIT) button to return to Play mode.