Kenwood KRF-V4080D - Manual (Page 22)

22 EN
ENGLISH
Using RDS
(Radio Data System)
RDS is a system that transmits useful information (in the form of digital
data) for FM broadcasts along with the broadcast signal. Tuners and
receiver designed for RDS reception can extract the information from the
broadcast signal for use with various functions, such as automatic
display of the station name.
RDS functions:
PTY (Program TYpe Identification) Search ∞
Automatically tunes to a station that is currently broadcasting the
specified program type (genre).
PS (Program Service Name) Display
Automatically displays the station name transmitted by the RDS
station.
RDS AUTO MEMORY function ¢
Automatically selects and stores up to 40 RDS stations in the preset
memory.
If fewer than 40 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.
Radio Text function
Displays the radio text data transmitted by some RDS stations when
you press the RDS DISPLAY key. There is “NO RT” display if no text
data is transmitted.
The “RDS” indicator lights up when an RDS broadcast (signal) is
received.
Note
Some functions and function names may differ for certain countries
and areas.
Before using a function utilizing the RDS, be sure to perform the RDS
Auto Memory operation by referring to the description in “Presetting
RDS stations (RDS AUTO MEMORY)”.
¢
Listening to radio broadcasts
This model can store up to 40 stations in the memory and recall them by
one-touch operation.
Radio stations can be classified into RDS (Radio Data System) stations
and other stations. To listen to or store RDS stations in the preset
memory see “Using RDS (Radio Data System)”.
Tuning (non-RDS) radio stations
“AM” or “FM” indicator
appears in the display
“AUTO” indicator lights
up in the display.
1
Use the INPUT SELECTOR knob or TUNER key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
1 FM
2 AM
3
Use the AUTO key to select the desired tuning method.
Each press switches the tuning method as follows:
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
• Normally, set to “AUTO” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob or keys, or TUNING 1 /
¡ keys to select the station.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the desired
station.
Frequency
display
“TUNED” is displayed
when a station is received.
“ST.” lights when
a broadcast is being
received in stereo.
MULTI CONTROL
INPUT SELECTOR BAND AUTO
MULTI
CONTROL
TUNER
AUTO
BAND
TUNING 1 / ¡
04.1.24, 7:13 PM 22