Konica Minolta C550 - Manual (Page 66)

Using copy functions 2
C550 2-23
Using copy f
unct
ions
Chapter 2
*1
If no finisher is installed and all of the following
conditions are met, printed copies can be fed out
and sorted in an alternating crisscross pattern.
– 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size)
paper is used.
– Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
– The “Auto” Paper setting is selected.
– The “Auto” Paper setting is not selected when the
“Mixed Original” setting is selected.
*2
If a Staple setting is selected, the “Collate (By Set)”
setting is automatically selected. The “Offset”
setting cannot be selected at the same time that a
Staple setting is selected.
*3
The Staple settings are available only if the optional
finisher is installed.
*4
The Punch settings are available only if the punch kit
or Z folding unit is installed with the optional finisher.
*5
The number of punched holes differ depending on
the country (region) where the unit is installed. For
details, consult your technical representative.
*6
The Half-Fold, Center Staple & Fold and Tri-Fold settings
are available only if optional finisher FS-608 is installed.
*7
The Z-Fold setting is available only if the Z folding
unit is installed with the optional finisher.
Z-Fold
*7
Select this setting to fold copies in half along
the center, and additionally mountain-fold
one of the halves before feeding them out.
Setting Description