Konica Minolta C550 - Manual (Page 70)

Using copy functions 2
C550 2-27
Using copy f
unct
ions
Chapter 2
paper is stapled or holes are punched along the
long side of the paper if the document length is
11-11/16 inch (297 mm) or less or along the short
side of the paper if the document length is more
than 11-11/16 inch (297 mm) .
When the “2 Position” Staple setting is selected
5
Touch [OK], and then touch [OK] in the next two
screens that appear. Otherwise, touch [Main
Screen].
The Basic screen appears again.
2
Note
The number of punched holes differs depending on the
country (region) where the unit is installed. For details,
consult your technical representative.