Kyocera FS-680 - Manual (Page 51)

Expanding Memory
1- 32
Expanding Memory
The printer comes standard equipped with 4 MB of main memory. However, more complex pages can
be printed and processing speed increased by expanding the printer's memory. There is one slot
available in the printer for expanding memory. Printer memory can be expanded to up to 36 MB by
installing optional extended memory chip (SIMM) in the slot.
Note______________________________________________________________________
The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certified
technician. Kyocera shall not be liable for damage due to improper installation of the expansion
memory.
Memory Required by the Printer Environment
It may be necessary to extend memory depending on the operating environment of the printer. Please
refer to the table below for minimum memory requirements in various environments.
Minimum Memory Required
Resolution: 300 dpi Resolution: 600 dpi
HP LaserJet 5P (factory setting) 4 MB 4 MB
HP LaserJet 5P, Resource protection — 10 MB
Printing Environment