Kyocera FS-680 - Manual (Page 97)

Chapter 5 Troubleshooting
5-9
Indicators Corrective Action
Add a sheet of paper to the manual feed tray, and press the ON LINE/
STATUS key. Printing will start.
(The DATA/LTR indicator also flashes if data is being sent.)
Open the printer and correct the paper jam. See page 5-12.
The indicator on the front panel also flashes the location of the paper jam.
(In this example, a paper jam occurred in the printer’s cassette. If the jam had
occurred in the optional cassette, both the MANUAL/LGL and CASSETTE/
OTHERS indicators would flash. If the jam had occurred in the manual feed
tray, the MANUAL/LGL indicator would flash.)
There is not enough toner inside the toner container.
Be sure to promptly replace with a new toner as the printer will stop printing
before long. Clean the printer after replacement. (See Chapter 4.)
There is no more toner in the toner container.
The printer has stopped because there is no more toner. Replace with a new
toner kit. After replacing, be sure to clean the printer. (See Chapter 4.)
(Continued on next page)